Author: vicpimaker

Posted on

NetSig

net sig

First Meeting – Thursday, July 25, 2019
6:30 PM to 8:00 PM 
Q-College · Suite 303 771 Vernon Ave · Victoria, BC

Bring a laptop with Wireshark (download) installed: 
We’ll be covering the basics of packet capture, and seeing what is actually on your network. More Wireshark: pad

What is NetSig?

A Special Interest Group focused on computer networking.
Building networks for Today and Tomorrow!

1.5 hours on a weekday evening
Half of the meeting is education or presentation. 
Half is sharing, and problem-solving.

A gathering of like-minded persons.
Understand and solve some of the challenges in networking today.
Are you IPv6 ready? 
Help Victoria become a leader, rather than a follower in Networking.

Topics

Education | Traffic analysis: ELK stack and Packet Beat | Virtualized Networking in Cloud containers | IPv6 | Routing |

Posted on

Summer Break 2019

Victoria PiMakers and Others are on a summer break.  We will meet again on Saturday, September 14th,  at Q-College.  The presentation(s) will be “My Summer Show & Tell.”

In the meantime…


Linux Sigs!
First Saturday of the Month
July 6th and August 3rd
9:30 am – 12:00pm
Quality Foods, Upstairs Large Boardroom
Eagle Ridge Plaza
27 Helmcken Rd

And The Net Sig!
First meeting
Thursday, July 25, 2019 and the next meeting is August 22.
6:30 PM to 8:00 PM
Q-College
Suite 303 771 Vernon Ave · Victoria, BC

A Special Interest Group focused on computer networking. Building networks for Today and Tomorrow!

Half of the meeting is education or presentation. Half is sharing and problem-solving.

Bring a laptop with Wireshark installed: We’ll be covering the basics of packet capture, and seeing what is actually on your network.

Posted on

Intro to Pi and Others: Part 4

Light it up!

Tuesday, May 21, 2019
6:00 PM to 7:30 PM
Q-College
Suite 303 771 Vernon Ave · Victoria, BC

Intro to Pi & Others is a 4 part series of short monthly sessions to help get you up and running with your Pi or Other (embedded device). It is a structured hour-long session where you can ask questions.

Please bring in your Pi, HDMI cable, and power supply. All other equipment will be provided.

This is a four-part series with each session building on the previous sessions, where Pi basics of software and hardware will be explored. Read More

Posted on

Intro to Pi & Others Part 3

Light it up!

Tuesday, May 7, 2019
6:00 PM to 7:30 PM
Q-College
Suite 303 771 Vernon Ave · Victoria, BC

Intro to Pi & Others is a 4 part series of short monthly sessions to help get you up and running with your Pi or Other (embedded device). It is a structured hour-long session where you can ask questions.

Please bring in your Pi, HDMI cable, and power supply. All other equipment will be provided.

This is a four-part series with each session building on the previous sessions, where Pi basics of software and hardware will be explored. Read More

Posted on

Sat Apr 27, 2019 – Wireguard IPv6 VPN – IPv6 in the Land of NAT

10:00am
Camosun College
Interurban Campus
4461 Interurban Road · Victoria, BC
Tech Bldg, Tec 177(parking at lot 8 for park users)

Go to any Starbucks, McDonald’s, the airport, the Library or even Camosun, and you will find yourself on a NATted network. How to get on the IPv6 Internet when stuck behind NAT? Enter the VPN (Virtual Private Network).

In this talk, we’ll show you how to use a VPN to get to the IPv6 Internet, but also share it with your friends (using an OpenWrt router)
Craig’s presentation can be found here. Your IPv6 web funny, Toads, can be found here. (IPv6 required).
The IPV6 utility, IPvFoo, is a Google and Firefox extension/addon, the github version can be found here.

Posted on

March 23, 2019 Let’s Encrypt

“Let’s Encrypt” is a free, public usable Certificate Authority that makes encrypting your web server’s http traffic easy. All you need to know about setup up a Raspberry Pi to use Let’s Encrypt will be presented by Mark G.

Camosun College
Bldg: Technology Bldg, Room: Tech 177 – 4461 Interurban Rd, Victoria, BC (parking at lot 8 for park users)

Download: Using Let’s Encrypt As A Certificate Authority on a Raspberry Pi

Loading...


Posted on

Sat, May 11, 2019 – Useful Tools

Useful Tools (git, sshfs, bash, etc)

Over the years, we have found certain software tools, which not only make our life easier but make the project more fun to do. In this meeting, we’ll share some of these software tools, and ask the group for other tools that they have found useful.

Presentation Notes Here:
http://drsol.com/~deid/pi/gitCraig/index.html
Saturday, May 11, 2019
10:00 AM to 12:00 PM
Q-CollegeSuite
303 771 Vernon Ave · Victoria, BC

Posted on

February 23, 2019 – Linux Containers on the Pi: A Server Farm in the Palm of your hand

Camosun College
Bldg: Technology Bldg, Room: Tech 177 – 4461 Interurban Rd, Victoria, BC (parking at lot 8 for park users)

Another container technology which can also run on SBCs is Linux Containers (LXC/LXD). Each LXC Container appears to have its own network stack. And therefore is much more flexible than Docker.

We’ll run 20 webservers all with individual addresses, all listening on port 80, on the Pi, something that can’t be done with Docker in its NAT-constrained world.

See Craig’s documentation here.

Posted on

February 9, 2019 – Project Day

raspberry pi

VicPiMakers will be supporting Projects in 2019. What are Projects? Deid’s pond is a project, for example. If you have a project idea, bring it in and we’ll see how we can help you complete your project.

George Bowden – Timed Lock
Heidi Bada – Intro – https://badadigitalmarketing.com/piprojects/
Ideas
Phillips Hue – timed dim/colour
Weather Sensors
Wearable Sensors in sport
Home Safety –
Flow sensor in toilet
Launchpad pro using python – Open Firmware project
Environmental Sensors – birdfeeder motion (wisecam), soil moisture
Pi version of “the clapper”
Eileen & Cody – Space Station Light & Sound – https://github.com/cozyhost/
Plan on lighting Neo Pixels
Peter Sprague – Packet Radio Satellite tracker
Portable, run in truck
Moved from Pi, to FreeBSD
Dan Willis – LED running as a Canadian flag flying
Weatherproof boxes outside

10:00am
Q-College, Suite 303 – 771 Vernon Ave, Victoria, BC

Contact projects at vicpimakers dot ca to share your project on our next Project Day.

Posted on

November 24, 2018 – Docker and a webserver on rpi

Camosun College
Bldg: Technology Bldg, Room: Tech 177 – 4461 Interurban Rd, Victoria, BC (parking at lot 8 for park users)

10:00am
docker logo

 

Docker is a computer program that performs operating-system-level virtualization, also known as “containerization”. A Container is a lightweight application component including all the required elements (libraries, config, etc). Containers can be quickly started up without polluting your file system with libraries, and config files, and easily upgraded with one command.

In this presentation, we’ll install docker on the Pi, and get nginx webserver up and running in a container.  The presentation material can be found here.

Docker Software https://en.wikipedia.org/wiki/Docker_(software)

 

Posted on

November 10, 2018 – Lights Out!

Saturday, November 10, 2018

10:00am
Q-College, Suite 303 – 771 Vernon Ave, Victoria, BC

Hosted by George Bowden and Craig Miller

LIGHTS OUT, a possible life saver. An acquaintance fell in the washroom and was unable to raise attention for thirty hours, and never fully recovered. The monthly cost ($50) of wearable alert bracelets and the habit of not wearing them is a large risk to seniors living alone. This alarm system, based on an ESP8266 and a php web app, alerts friends that a bathroom light has been left on for way too long. The link to the presentation docs is here.