| Arduino Uno |
Arduino Uno (Rev3) |
type Arduino UNO (Rev3) |
| C1 |
Electrolytic Capacitor |
package 100 mil [THT, electrolytic]; capacitance 1mF; voltage 6.3V |
| Candy cane power switch |
Taiway 100-SP-X-T1 SPDT Miniature Toggle Switch |
package THT; switching circuit SPDT; variant - through hole solder lugs.; part # 100-SP-X-T1-0-0-B1-M1 |
| Left Speaker (4 Ohm, 3W) |
Loudspeaker |
|
| Neopixel power switch |
Toggle Switch |
package THT; switching circuit SPDT |
| Neopixel Ring (12) |
12 NeoPixel Ring |
variant variant 1; part # 1643 |
| NEOPIXEL Strip (120) |
Neopixel Strip -- White (60/m) |
color white; variant variant 1 |
| Next |
Round Pushbutton |
switching circuit SPST; default state Normally Open |
| Part3 |
Adafruit Music Maker Shield with Amp |
variant variant 1; part # Adafruit #1788 |
| Play/Pause |
Round Pushbutton |
switching circuit SPST; default state Normally Open |
| Power DC 5V, 5A |
Power plug |
|
| Power LED 3mm |
Red (633nm) LED |
package 3 mm [THT]; color Red (633nm); leg yes |
| Prev. |
Round Pushbutton |
switching circuit SPST; default state Normally Open |
| R3 |
470Ω Resistor |
power 0.25W; bands 4; package THT; pin spacing 400 mil; resistance 470Ω; tolerance ±5% |
| R4 |
470Ω Resistor |
power 0.25W; bands 4; package THT; pin spacing 400 mil; resistance 470Ω; tolerance ±5% |
| Right Speaker (4 Ohm, 3W) |
Loudspeaker |
|
| Stop |
Round Pushbutton |
switching circuit SPST; default state Normally Open |
| Volume |
Rotary Potentiometer (Small) |
type Rotary Shaft Potentiometer; package THT; size Rotary - 9mm; maximum resistance 50kΩ; track Linear |