<div dir="ltr">1) What single passive component can you use to measure the voltage that your multimeter puts out on its leads when measuring ohms?<div><br clear="all"><div>2) How can you stabilize the voltage at the point of analog read in the following voltage divided thermistor network?</div><div>+3.3v ------- divider resistor ------point of analog read ------ Thermistor resistor ------ Ground<br></div><div><br></div><div>3) What should be the value of the divider resistor to get the most dynamic range in the voltage divider at the point of analog read.  The thermistor is 10k at 20 Celsius</div><div><br></div><div>4) About how long will a 10k thermistor take to stabilize its resistance to one part per 5000 in a constant temperature free air environment, given 2 volts across it?</div><div>See reference material <a href="https://www.ti.com/lit/an/slyt774/slyt774.pdf?ts=1608340466291&ref_url=https%253A%252F%252Fwww.google.com%252F">https://www.ti.com/lit/an/slyt774/slyt774.pdf?ts=1608340466291&ref_url=https%253A%252F%252Fwww.google.com%252F</a></div><div><br></div><div>5) Do you have "passive" electronic challenges to add?....</div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>George Bowden, <br><a href="mailto:gtbowdeng@gmail.com" target="_blank">gtbowdeng@gmail.com</a></div></div></div></div></div>